Maxim’s Octal High-Side Switch and Driver Safely Demagnetizes Any Inductive Load for Industry 4.0 Applications

MAX14913 provides ultra-high speed switching and unique demagnetizing clamps

Designers of industrial controllers can safely drive and demagnetize any inductive load for Industry 4.0 applications with the MAX14913 octal high-side switch and driver from Maxim Integrated Products, Inc. (NASDAQ: MXIM). With a unique, innovative, safe-demagnetizing clamp on each output, it easily and reliably interfaces low-voltage digital signals to 24V output-control lines.

• For more information about MAX14913, visit: http://bit.ly/MAX14913
• Download a hi-res image: http://bit.ly/Image_MAX14913
• Download a block diagram: http://bit.ly/Block_Diagram_MAX14913

For most industrial applications, engineers need a high-side switch to control inductive loads. The challenge is how to discharge the energy in the inductor when the switch opens and current flow stops. If the inductance and the resulting stored energy are high, a driver IC could be permanently damaged due to the generated heat.

Using its safe-demagnetization feature, the MAX14913 can discharge and demagnetize any inductive load safely via its integrated clamps. For a more robust solution, it provides open-wire and short-circuit diagnostics, the most-common external failure mode. Its best-in-class propagation delay enables higher system speed and throughput. Compared to its predecessor, the MAX14913 achieves 15x space savings by eliminating 16 diodes from its previous solution. In addition, it has eight 640mA high-side switches that can also be configured as push-pull drivers for high-speed switching. Applications include programmable logic controllers (PLCs), motion control units, drives, and other industrial and process automation applications.

Read More